HYDAC贺德克流量传感器EVS 3100

来源：    日期：2017/10/19    浏览量：次

PDF资料下载

HYDAC贺德克流量传感器EVS 3100  中文描述

可用的版本：标准;与恒指传感器检测

EVS3100系列（铝合金系列）的流量变送器是专门为构思利用液压等流体技术工厂。它们操作根据涡轮原理，这意味着，一个叶轮的旋转在介质的流动的旋转速度被记录并转换成4?20 mA模拟信号。两个额外的G1 / 4螺纹孔中的涡轮机壳体的孔提供的流量变送器，附加连接选项，例如对温度和压力传感器。在EVS 3100 -H系列与恒指传感器检测的流量变送器结合使用与德克测量设备HMG 500 ， HMG 510 ，英国政府3000和1000 CMU进行专门开发。对于数据传输的目的， EVS 3100 -H设备都配备了恒指接口（贺德克传感器接口） 。这下，恒指传感器由上面列出的HYDAC测量设备和所有必要的基本设备设置完全自动识别，然后立即自动进行。

耐压力高达400巴（根据版本）
从1 ... 100厘斯粘度
输出信号4 ... 20 mA的
温度和/或压力传感器可以连接其他
 

HYDAC贺德克流量传感器EVS 3100  英文描述

Available versions:
Standard; with HSI sensor detection

The flow rate transmitters of the EVS 3100 series (aluminium series) are specially conceived for utilisation in hydraulic and other fluid technology plants. They operate in accordance with the turbine principle, which means that the rpm of an impeller wheel rotating in the flow of the media is recorded and converted into a 4 ... 20 mA analogue signal. Two additional G1/4 threaded bore holes in the turbine housing provide the flow rate transmitter with additional connection options, e.g. for temperature and pressure sensors. The flow rate transmitters of the EVS 3100-H series with HSI sensor detection were specially developed for use in conjunction with the HYDAC measurement devices HMG 500, HMG 510, HMG 3000 and CMU 1000. For data transmission purposes, the EVS 3100-H devices are equipped with an HSI interface (HYDAC Sensor Interface). Thanks to this, the HSI sensors are recognised completely automatically by the HYDAC measurement devices listed above and all necessary basic device settings are then immediately undertaken automatically.
Pressure-resistant up to 400 bar (depending on the version)
Viscosities from 1 ... 100 cSt
Output signal 4 ... 20 mA
Additional connection of temperature and/or pressure sensors possible

流量测量变换器
流量测量的EVS 3000系列的换能器的工作原理根据涡轮原理（记录一个叶轮旋转，在媒体流的转） 。