HYDAC贺德克位置开关HLS 100

来源：    日期：2017/10/19    浏览量：次

PDF资料下载

HYDAC贺德克位置开关HLS 100  中文描述

客户特定的OEM产品的大型系列（如需订购数量开始以100为单位）

限位开关系列HLS 100已专门开发了用于检测的移动机械安全导向装置的极限位置。该交换机是专为连续使用安全电路/安全功能的机器了功能安全的背景下SIL 2 （ IEC 61508 ）和/或PL D（ ISO 13849 ） 。HLS 100由两部分组成：传感器磁体和传感器组件。同的两个霍尔效应传感器中的传感器组件的辅助下，在检测到磁体的定义位置（限制位置），把该开关的状态为“ON”时，这此位置进行检测，并以其他方式发送的切换状态“OFF”。开关状态是作为一个永久的PWM信号输出。在稳定的正常操作时，位置开关周期性地执行内部诊断步骤，该识别系统和随机误差。这样一来，发生的任何错误都立即检测。然后，输出信号被去激活完全，并且传感器的重新启动。

小巧紧凑的设计
适用于移动应用坚固的外壳
较高的工作温度范围
PWM输出
IP 67公连接器
SIL 2 / PL ð认证
 

HYDAC贺德克位置开关HLS 100  英文描述

Customer-specific OEM product for large series
(For ordering quantities starting with 100 units)
The position switch series HLS 100 has been specifically developed to detect the limit position of safety oriented devices on mobile machinery. The switches are designed for continuous use in safety circuits / safety functions in the context of the functional safety of machines up to SIL 2 (IEC 61508)
and/or PL d (ISO 13849).
The HLS 100 is composed of two parts: the sensor magnets and the sensor component.
With the aid of two Hall effect sensors in the sensor component, it detects the defined position (limit position) of the magnets and sends the switching status "ON" when this this position is detected, and otherwise sends the switching status "OFF".
The switching status is output as a permanent PWM signal. During stable normal operation, the position switch cyclically performs internal diagnostic steps, which identify systematic and random errors.
As a result, any errors that occur are detected immediately. The output signal is then deactivated completely and the sensor is restarted.
Compact Compact design
Robust housing suitable for mobile applications
High operating temperature range
PWM output
IP 67 male connector
SIL 2 / PL d certification