HYDAC贺德克污染传感器AS 1000

来源：    日期：2017/10/19    浏览量：次

PDF资料下载

HYDAC贺德克污染传感器AS 1000    中文描述
As 1000是进一步发展的证明是2000系列中的油在线检测的水，特别是作为OEM传感器状态监测（流体状态监测） 。它记录了相对饱和浓度水的比例，并发送此饱和度为4 ... 20 mA的信号。同时，在AS 1000测量的流体的温度，并将它传送一个4到20毫安信号以及该AS 1000因此实现了连续监测的液压油和润滑油;精确

饱和度： 0? 100 ％
温度：-25 ?100 ℃，
由于其结构紧凑，坚固可靠的设计
廉价的传感器，也为系列的利用率
不必进行校准，以不同类型的油
压性，即使采用脉动
宽液温度范围
早期识别的水问题，导致避免混乱和不必要的操作中断


HYDAC贺德克污染传感器，贺德克提供流体传感器记录-广泛的产品范围：
固体颗粒污染
金属颗粒或
流体污染（水） 。
这些参数可以不间断地与在线监测。
工厂及零部件的可规划可用性
突然停机时间避免
降低运营成本
预防灾难性后果性损害的植物及相关交付的瓶颈。
预防和状态检修



 HYDAC贺德克污染传感器AS 1000   英文描述

The AquaSensor AS 1000 is the further development of the proven AS 2000 series for the online detection of water in oils, particularly as an OEM sensor for condition monitoring (Fluid Condition Monitoring). It records the percentage of water relative to the saturation concentration and transmits this saturation level as a 4 … 20 mA signal. At the same time, the AS 1000 measures the temperature of the fluid and transmits this as a 4 … 20 mA signal as well The AS 1000 thus enables a continuous monitoring of hydraulic and lubrication oils; precise, permanent and online.
Saturation level: 0 … 100%
Temperature: -25 … 100°C
Reliable due to its compact and robust design
Inexpensive sensor, also for series utilisation
Not necessary to calibrate to different types of oil
Pressure-resistant, even with pulsations
Wide fluid temperature range
Early recognition of water problems, resulting in avoidance of disruptions and unnecessary operations interruptions