HYDAC贺德克压力开关EDS 1700

来源：    日期：2017/10/19    浏览量：次

PDF资料下载

HYDAC贺德克压力开关EDS 1700  中文描述

可用的版本：
标准
凭借其集成的压力测量单元， EDS的1700提供了4个字符的显示屏和4个开关插座与所有的现代电子压力开关的优点用户。
4开关点和复位点可以相互独立地很容易的进行设置由箔键盘的方式。对于监控系统最优化的整合（例如使用SPS ） ，一个模拟输出（ 4 ... 20mA或0? 10V ），可用于集成监控系统（例如使用SPS） 。应用EDS 1700的主要领域是液压和气动领域。该器件是理想的地方使用频繁切换程序（几万元） ，连续开关点精度或简单的和精确的设定功能是必需的。

?与DMS不锈钢膜片集成压力传感器
?精度0.5 ％或1 ％ FS
?4个字符的数字显示
?操作简单，通过按键编程
?4限值继电器，切换点和复位点可以彼此独立地调整
?模拟输出信号可以被选择
?许多有用的附加功能
?安装位置可被选择（下面/上面，键盘和显示器，可以旋转180°的压力连接）
?任何显示区域调整为测定值的描述，例如：在千牛顿，千克，磅， ...


 

HYDAC贺德克压力开关EDS 1700  英文描述

Available versions:
Standard

With its integrated pressure measurement cell, the EDS 1700 provides the user with a 4-character display and the 4 switching outlets with all of the advantages of a modern electronic pressure switch. 4 switching points and reset points can be set independently of one another very easily by means of a foil keyboard. For optimum integration in monitoring systems (e.g. with SPS), an analogue output (4 ... 20 mA or 0 ... 10V) is available for integration in monitoring systems (e.g. with SPS). The main areas of application of the EDS 1700 are in the area of hydraulics and pneumatics. The device is used ideally wherever frequent switching procedures (several million), continuous switching point accuracy or simple and precise setting capability are required.
Integrated pressure sensor with DMS on stainless steel diaphragm
Accuracy 0.5% or 1% FS
4-character digital display
Simple handling through key programming
4 limit value relays, switching points and reset points can be adjusted independently of one another
Analogue output signal can be selected
Many helpful additional functions
Installation position can be selected (pressure connection below/above, keyboard and display can be rotated by 180°)
Adjustment of any display areas for the depiction of the measurement values, e.g.: in kN, kg, psi, ...

压力开关的概观（注：不是所有的特征可以自由地相互组合，请从相应的数据表的精确信息）